Main

Selection Guide

Contact Us

                                           Part No.   Z4FC1B1301781                 

SURFACE  MOUNT - REFLOW  SOLDERABLE

......................................................................................................................................................................................................

1-1 The specifications apply to the coreless cylindrical permanent magnetic micro vibration motor

   DC model  Z4FC1B1301781.

1. Standard Condition

1-1 Standard Voltage                 3.0V DC
1-2 Voltage Range                     2.6~3.6V DC
1-3 Standard Load                    Counter weight R2.25x3.5L
1-4 Rotating Direction                C.W. from the direction of the Counter weight
1-5 Moving temp. range              -10˚C~+60˚C
1-6 Storage temp. range             -40˚C~+85˚C (temp. 20˚C, relative humidity 65% RH, pressure 1013hPa)
1-7 Motor position                     All direction

2. Measuring Condition

2-1 Motor position                     Horizontal
2-2 Current                              DC stabilized current
2-3 Temp/Humidity                    Principle measurement 5˚C~35˚C, relative humidity
                                             30%~90%. For abnormalities, 20˚C±2˚C, 65%±5% RH
2-4 Rotating direction                C.W. from the direction of the counter weight (CW)

3. Electrical Features

3-1 Standard loaded rotation      10000±2500 rpm (under Standard Voltage and load)
3-2 Standard loaded current       110 mA Max (under Standard Voltage and load)
3-3 Starting current                  130 mA Max (under Standard Voltage)
      (Locked current)                  (2/3R extreme resisting rate)
                                              Not in the position which the brushes contact the
                                              commutator at two points
3-4 Standard loaded Starting       Under loaded condition towards CW, rotor shall move in 
      Voltage                              all positions at 2.6V
                                              (counter weight is turned 360° slowly )
3-5 Insulation resistance             Under 50VDC,1MΩ Min between motor terminal and case
3-6 Voltage Insulation                 Under 50V AC, without irregularities in 1 min between terminal and case
3-7 Electrical noise                     Using ring varistor
3-8 Wiring resistance                  2/3 between poles 26.0Ω±3.0Ω
3-9 Mechanical noise                  50dB(A) max from 10cm
                                              Background noise:28dB(A) max

4. Mechanical Structure

4-1 Appearance                        External measurement which should be within the
                                             difference accordance ,Should not show Scratches,
                                             damages or loosening of the grip
4-2 End play of shaft                 0.30mm or less
4-3 Weight                               Approximately 1.2g
4-4 Weight of counter weight      Approximately 0.6g

5. Environment specification

5-1 Vibration Test                     Under packaged condition and vibration range of
                                              1.5mm cycle, subjecting to continuous speed change
                                              of 2mm or more during 3mins or less.
                                              Should satisfy item 3 & 4 even in additional of 30 mins
                                              with vibration of 1200~3300times/min.
5-2 Shock Test                         Inserting motor into a 6 sides simulated box (appx 60g),
                                              drop from 1.2m high on a concrete & metal surfaces and
                                              satisfying item 3 & 4
                                              Drop times: two drops per plane for a total of 12 drops

5-3 Storage Test                       Temperature cycle (without presence of condensation on the motor)

                                               After exposure for 24Hrs and satisfy item 3 and 4

5-4 Counter weight High Temperature Test
      No vividly remarkable corrosion at 60˚C 90% HR after 250Hrs

5-5 Pull Test
      Counter weight pull (Under normal temperature and humidity)
      Counter weight must withstand axial pull of 3 kgf to destruct.

6. Life Test
 

                          Input voltage:       3.0V DC
                          Counter weight:     R2.25×3.5L appx 0.6g
                          (C) High temperature exposure at 60˚C, 20% RH
                                (D) Standard verification
                                      (1) Variety rate of standard rotation is less than +30%/-20% from initial.
                                      (2) Variety rate of standard current is less than +20%/-30% form initial.

6-1 Temperature Shock Life Test
(B)To maintain (A) cycle for 140hrs in the process of temperature shock
(D)To satisfy the standard specification

6-2 High Temperature Exposure Life Test
(C)To maintain (A) cycle under high temperature for 48hrs
(D)To satisfy the standard specification

7.  Lot no. indication
     The lot no. is indicated by print as below

8. Packing Condition
     8-1 Smallest packing condition

8-2 Cardboard Packing Condition

8-3 Final Packing Condition

9. Others

    9-1 Whatever items which be not stated in this specification will be not guaranteed.

    9-2 Do not subject the motor under locked condition for long times.

    9-3 Reflow Temperature : 250˚CMax
            Exceeding this temperature will result in shorting and dead spot failures.
            Excessive heat weakens the magnets and it is also possible that the coating
            on the magnet wires melts causing a short in the motor.

9-4 Output test date and Cpk will be attached (n-35) of follows:
           Loaded rotation                                   rpm
           Loaded current                                    mA
           Lock current (Starting Current)              mA
           Starting voltage V (without consideration of Cpk value)

       Home | About us | Factory tour | Certifications | Selection Guide | News | Contact us | Email us

     Copyright 2008  ©  VibratorMotor.com