|
|
|
|
|
|
|
|
|
General Information |
|
|
|
Pricing of our cylindrical vibration motors is primarily determined by the DIAMETER of the motors body. The smaller the diameter of the vibration motor, the more expensive the vibration motor is. Our Pancake / Coin motors are more expensive than any of our cylindrical vibration motors. |
|
|
A full specification sheet for any vibrator motor may be viewed by clicking on the MODEL NUMBER of the vibrator motor located in the far left column. |
|
|
To aid you in grouping vibration motors by any critical specification, the entire table may be sorted by ANY COLUMN SPECIFICATION (in ascending or descending order) by clicking on ANY of the COLUMN HEADINGS. |
|
|
Click here for Sample request. |
CLICK on any column header to sort by that column
|
Part Number | Figure See below | Motor Dia (mm) | Motor Thickness (mm) |
HWCC
(mm) | Rated voltage (v) |
Operating voltage
(v) | Rated current (ma)max | Rated speed (rpm) |
| 2 | 10.0 | 2.6 | 4.15 | 3.0 | 2.5~4.0 | 90 |
10000 |
|
| 2 | 10.0 | 2.6 | 2.9 | 3.0 | 2.7~3.3 | 90 |
9000 |
|
| 1 | 10.0 | 3.0 | N/A | 3.0 | 2.5~4.0 | 100 |
10000 |
|
C1226B500F |
1 | 12.0 | 2.6 | N/A | 3.0 | 2.5~4.0 | 80 |
9000 |
| 1 | 12.0 | 3.4 | N/A | 3.0 | 2.5~4.0 | 80 |
9000 |
|
HWCC = Height with Contacts Compressed, also known as working height. This is the height measured from the PCB to the top of the motor body. N/A = Not Applicable |
Click to go to Cylindrical Type
ALL
MOTORS ARE AVAILABLE WITHOUT THE WEIGHT
ON THE SHAFT.( SHAFT ONLY )
|
Copyright © 1997 - 2008 JinLong Machinery |
